Through Hole Slip Ring are through-bore slip rings (the center hole can pass through the drive shaft, gas-liquid passage; Through Hole Slip Ring can also integrate high frequency, fiber, encoder, waveguide, gas and liquid and other joints). The use of advanced fiber brush ensures reliable contact under extremely low friction. The center hole is available from 0 to 1000mm. The current is from mA to 5000 amps. The voltage can be up to 10000 volts, which can fully meet different needs of transmission.

Features:
●Transmit analog and digital signal
●The power and signal are mixed transmitted, and the signal categories are as follows:
●Ethernet: Rate (10Mbps/100Mbps/1000Mbps)
●Industrial Ethernet: EtherNet , EtherCAT ,ProfiNet, Powerlink , SercosIII/IP, etc.
●HD video: SDI, LVDS, etc.
●Serial communication: RS232, RS485, RS422, etc.
●Universal Serial Bus: USB2.0
●Industrial Fieldbus: CANBus,ProfiBus, InterBus, CC-Link, DeviceNet, etc.
●Sensor signal: thermal resistance, thermocouple, strain gauge, etc.
●Long service life, maintenance-free
●Easy to install

Main Applications:
●Industrial automation equipment
●Medical equipment
●Wind power equipment
●Test equipment
●Exhibition
●Display equipment
●Robots
●Turntable equipment
●Amusement equipment
●High-speed railway equipment
●Packaging machinery
●Ship offshore equipment
●Construction machinery

Installation Specifications:

1.The slip ring is not designed to bear the weight of the equipment to which it is connected.Also,the wires are vulnerable to pull and drag.
2."Hard mounting" of both ends(rotor and stator) of the slip ring is forbidden. We suggest stabilizing the slip ring on the shaft with 4 screws, then plant the anti-rotation tab. Meantime, secure all wires to avoid interference and damage.
3.Slip rings are precise electronic components. Take protection measures in case of harsh environment or apply slip rings with higher protection level.

LPT Through-bore Slip Rings Outline Drawing:

Wire Color Code:

http://www.efine-com.com/